KNIFE SHARPENING

How to Sharpen Kitchen Knives Properly (Without Damaging the Blade)

Close-up of hands cutting cucumber on a wooden board beside the Winklez rolling knife sharpener

Blunt knives not only create a lot of frustration while preparing meals but are also very dangerous. When a knife blade becomes blunt, the effort needed to make a cut on the ingredients increases, which leads to slips and cuts. Knowing how to sharpen kitchen knives properly will ensure the safety of your hands, will reduce preparation time and will allow you to use your blades for decades rather than months.

Luckily for you, learning how to sharpen your knives is not rocket science, and after learning a couple of basic facts and gaining experience, you will be able to sharpen your knives yourself. This guide will cover such aspects of knife sharpening as honing and sharpening, choosing the appropriate knife sharpener, sharpening angle and using tools such as whetstone and rolling knife sharpener.

Honing vs Sharpening: What's the Real Difference?

There is a lot of confusion here among many individuals, and this is precisely why a lot of knives tend to get damaged earlier than necessary. The honing process does not take off any metal from the knife blade. 

It just aligns the edge that is present by utilizing a honing rod or steel and thus why the chef uses it before most uses. On the contrary, sharpening involves grinding a small amount of metal off in order to form a new edge. 

You will have to carry out this process once every few months or so depending on how much cooking you do.

Why Knife Sharpening Angle Matters So Much

Setting the correct angle to achieve this may be one of the most important steps in the entire process. If you get it too low, then the edge will fail to maintain its sharpness. However, if it is too high, then you are bound to end up grinding away way too much metal, hence making the knife shorter-lived. In most cases, knives in Western kitchens sharpen well at angles ranging between 15 and 20 degrees on either side, whereas Japanese knives have angles ranging close to 15 degrees.

If you are new to this activity, you need not worry about the precise number of degrees. What matters most is consistency throughout the process.

Choosing the Right Knife Sharpener

A poor choice of the sharpener does not always lead to good results, and sometimes it might even harm your knife beyond repair. Below you will find a brief overview of the most common types of sharpeners out there:

  • Whetstone: Allows you the maximum control and the possibility to get the sharpest edge ever, although it requires a bit of training to learn.

  • Rolling Knife Sharpener: Perfect choice for beginners due to its automatic angle adjustment system.

  • Pull-Through Sharpener: Quick and easy to use, but tends to shave off excessive amounts of metal.

  • Electric Sharpener: Quick and convenient for a touch-up, but somewhat rough with delicate blades.

  • Honing Rod: Not a sharpener per se, but a must-have to maintain the edge properly in between sharpening sessions.

If you are eager to have an optimal sharpener that guarantees the best possible edge in the long run, opt for the combination of a whetstone and regular honing sessions with a rod.

How to Sharpen a Kitchen Knife with a Whetstone

Sharpening using whetstone may take a little time, but this is the way that all professional chefs recommend. Here's how to do it properly:

  • Soak the stone for about 10 minutes if you have water stone, and apply oil if you have oil stone.

  • Put the stone on a damp cloth in order to prevent it from sliding away during the process.

  • Take the knife at an angle, normally between 15 and 20 degrees, and hold it firmly.

  • Pass the blade through the stone with smooth motions, starting from the heel and ending with the tip of the knife.

  • An equal number of strokes on each side will make the edge sharp and well-balanced.

  • Then use a finer grit stone in order to sharpen the blade even more.

As you can see, there are many steps, but when you understand the angle and pressure needed, you will be able to finish this process in a couple of minutes.

Using a Rolling Knife Sharpener the Right Way

The rolling knife sharpener is built in such a way that all the guessing is eliminated from the process since it maintains the same angle all the time, making it a suitable choice for those who are still unsure about their skills in using the whetstone. The vast majority of the designs feature some kind of rolling discs or wheels that maintain the same angle during the sharpening process while the knife is being drawn.

The only thing one should not do while using it is apply excessive pressure or sharpen the knife too often because it removes metal quite fast.

Common Mistakes That Damage Knife Blades

However, even with the best of tools, some practices may slowly but surely dull down your knife. First of all, an inconsistent sharpening angle may be one of the most frequent reasons for ruining your blade since it provides an uneven edge that gets dulled easier. Excessive pressure is another popular practice since it does not sharpen your knife any quicker but simply wastes extra material. Failing to hone your knife after each sharpening session is also a bad idea since it means that you sharpen more often than you should.

How Often Should You Sharpen Your Knives?

In most cases, sharpening your knives twice or thrice in a period of two to three months should be sufficient. For people who cook every day and frequently deal with things that are hard, such as bones and frozen foods, they may require monthly sharpening of their knives. An easy method of doing that is the paper test; if a knife cuts a piece of paper without causing tears, then the knife is sharp enough.

Caring for Your Blade After Sharpening

After your blade has been honed to perfection, a small amount of maintenance will go a long way. The first thing you should do is clean and dry your blade immediately after honing. This will eliminate any excess metal from the blade. Do not store your blade loosely in a drawer; put it in a knife block, magnetic holder, or blade protector, as leaving it out is one of the quickest ways to dull your blade.

Conclusion

However, learning how to properly sharpen your knives is not as hard as it may sound if you get down to the basic principles, which include differentiating between honing and sharpening, maintaining a steady angle and picking the type of sharpening device that suits your comfort zone, be it a whetstone, a rolling knife sharpener or even one that does it fast on a daily basis. Sharpening your knives in such a way will make your cooking much safer, simpler and help the knives last for years without having to constantly replace them.


1. What should be the angle of the knife when sharpening it?
Almost all knives in the West will have the optimum angle of 15 to 20 degrees per side, although thinner Japanese knives should work around 15 degrees. The most important thing is the consistency in keeping the same angle during the whole procedure and not striving to keep the exact same angle.
2. Is it possible to use a rolling knife sharpener for beginners?
Surely, it is among the simplest instruments for beginners as it keeps the fixed blade angle. What is more, it does not need any special skills and provides good results.
3. How does honing differ from sharpening?
While honing will align the existing edge of a blade but won’t grind off any metal and can be performed regularly, sharpening involves grinding off a portion of the metal to create a fresh edge. Sharpening should be done every few months.
4. Will the improper use of the whetstone damage my knife?
Indeed, using improper angles and excessive pressure when sharpening the blade on a whetstone may lead to uneven wear of your blade's edge. To avoid this issue, you need to work carefully and slowly with even angles, applying the right grit stones in the correct sequence.
5. How often should I sharpen my kitchen knives?
In case of household consumers, it would have to be done at least every two to three months provided that you sharpen your kitchen knives in between as well.